2003 Chevy TrailBlazer Water Pump Replacement (4.2L Engine)
download Tool Required J 41240 Fan Clutch Wrench Removal Procedure 1. Drain the coolant. 2. Remove the fan and shroud. 3. Remove the drive belt. 4. Using the J 41240, secure the water pump pulley and...
View ArticleTips for Power Steering Inoperative/Steering Wheel Hard to Turn 2005-2008...
download The following diagnostics might be helpful if the vehicle exhibits the conditlon(s) described above. Use the appropriate recommendation based on what symptom has occurred....
View ArticleReplace Shifter Assembly/ Shifter Components or Ignition Lock 2005-2007...
download Condition Some customers may comment on any of the following concerns: • The shifter is hard to move or binds. • They cannot remove the ignition key. • It takes high effort to rotate the key....
View Article2007 Chevrolet Impala 4T65E Transmission 1-2 Shift Shudder at Light to...
download Models: 2001-2004 Buick Regal 2001-2005 Buick Century, LeSabre 2002-2007 Buick Rendezvous 2005-2007 Buick Terraza, LaCrosse, Allure (Canada Only) 2006-2007 Buick Lucerne 2001-2005 Chevrolet...
View Article2004 Mazda 6 i WATER PUMP DRIVE BELT Removal Installation
download WATER PUMP DRIVE BELT 1. Verify that the water pump drive belt auto tensioner indicator mark does not exceeds the limit. ? If it exceeds the limit, replace the water pump drive belt. (See...
View Article2003 Buick Rendezvous Water Pump Replacement Removal Procedure
download 1. Drain the cooling system until the coolant is below the level of the water pump. 2. Remove the drive belt guard. 3. Loosen the water pump pulley bolts. 4. Remove the drive belt. 5. Remove...
View Article2004 Chevrolet Malibu Water Pump Replacement Removal Procedure
download Water Pump Replacement (L61) Tools Required J 43651 Water Pump Holding Tool Removal Procedure 1. Drain the coolant. 2. Remove the thermostat housing pipe-to-cylinder bolt near the front of the...
View Article1995 Mercury Villager Water Pump Removal Installation
download 1. Drain the cooling system. Refer to Section 03-03 for the procedure. 2. Disconnect the battery ground cable (14301) . 3. Remove the generator drive belt, water pump and power steering pump...
View Article1994 Mercury Villager Water Pump REMOVAL AND INSTALLATION
download Water Pump Removal 1. Drain the cooling system. Refer to Section 03-03. 2. Disconnect the battery ground cable (14301) . 3. Remove the generator drive belt, water pump and power steering pump...
View Article1998 Ford Mustang Water Pump Removal Installation
download 1. Drain engine cooling system. Refer to Section 03-03. 2. Remove upper radiator sight shield (8C291). 3. Disconnect radiator overflow hose (8075) from radiator (8005). Remove bolts retaining...
View Article
